Denon AVR-3803 Operating Instruction

Also see for AVR-3803: Operating instructions Operating instructions Service manual Operating instructions Specifications

Contents

24ENGLISH1 Press the power ON/SOURCE button and theOFF button at the same time.• “PRE” appears on the remote control unit’sdisplay.2 Use the • and ª cursor buttons to display“RST” on the remote control unit’s display, thenpress the ENTER button.• “PRE” is displayed.(2) Resetting “learned” buttonsDVD2, 3, 4112, 3, 43 Use the • and ª cursor buttons to display“LRN” on the remote control unit’s display, thenpress the ENTER button.• “SEL” is displayed.4 Use the • and ª cursor buttons to select themode of the button to be reset, then press theENTER button.• The LCD’s back light flashes during theresetting operation, and when the operation iscompleted, “OK” is displayed and the setreturns to the normal operating mode.1 Press the power ON/SOURCE button and theOFF button at the same time.• “PRE” appears on the remote control unit’sdisplay.2 Use the • and ª cursor buttons to display“RST” on the remote control unit, then pressthe ENTER button.• “PRE” appears on the remote control unit’sdisplay.(3) Resetting the system call buttonsDVD2, 3, 4112, 3, 53 Use the • and ª cursor buttons to display“CALL” on the remote control unit’s, then pressthe ENTER button.• “SEL” appears on the remote control unit’sdisplay.4 Press the • and ª cursor buttons to select thesystem call setting to be reset.The remote control unit’s display switchesas shown below each time the • and ªcursor buttons are pressed.CALL 1CALL 25 To reset CALL 1 or CALL 2, select “CALL 1” or“CALL 2”, then press the ENTER button.• The LCD’s back light flashes during theresetting operation, and when the operationis completed, “OK” is displayed and the setreturns to the normal operating mode.