Denon AVR-3803 Operating Instruction

Also see for AVR-3803: Operating instructions Operating instructions Service manual Operating instructions Specifications

Contents

32ENGLISHThe channel whose channel level is adjustedlowest can be faded to –12 dB using the faderfunction.If the channel levels are adjusted separately afteradjusting the fader, the fader adjustment valuesare cleared, so adjust the fader again.Fader function• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels(SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from the differentpositions when playing multi-channel music sources.1 Select “FADER”.This is only displayed when setting the fader control.2 21FL C FR SR SBR SBLSLSWFADER(Remote control unit)The channel switches in the order shownbelow each time this button is pressed.2 Press the 0 button to reduce the volume ofthe front channels, the 1 button to reduce thevolume of the rear channels.(Remote control unit)The fader function doesnot affect the SW channel.Dolby Surround Pro Logic II mode1 Select the Dolby Surround Pro Logic II mode.• The Dolby Pro Logic indicator lights.Light(Main unit) (Remote control unit)2 Play a program source with the mark.• For operating instructions, refer to the manuals of the respective components.1 3, 5 1, 4, 6SELECT134, 5, 6DisplayThe Dolby SurroundPro Logic II Cinema orMusic mode can bechosen directly bypressing the CINEMAor MUSIC button onthe remote controlunit during playback inthe Dolby SurroundPro Logic II mode.NOTE:• There are four Dolby Surround Pro Logic modes(NORMAL, PHANTOM, WIDE and 3 STEREO).The AVR-3803 sets the mode automaticallyaccording to the types of speakers set during thesystem setup process (page 10).3 Set the surround parameter mode.(Main unit) (Remote control unit)MODE cinemaDisplayThe on-screen display differs according to whether the operation isperformed from the main unit or the remote control unit.4 Select the play mode.SELECT(Main unit) (Remote control unit)DisplayMODE cinema MODE music MODE emulation5 Select the various parameters. (See “Surround parameters q” for a description of the various parameters.)(Main unit) (Remote control unit)MODE EMULATIONCINEMA EQMODE CINEMACINEMA EQMODE MUSICPANORAMADIMENSIONCENTER WIDTHWhen set with the on-screen display usingthe remote control unit while in the MUSICmode, set the “ ” mark to “OPTION 0”using the • and ª cursor buttons, then pressthe 0 cursor button.Press the ENTER button to return to theprevious screen.6 Set the various surround parameters.SELECT(Main unit) (Remote control unit)7 When the surround parameters are set usingthe buttons on the main unit, stop operatingbuttons after completing the settings. Thesettings are automatically finalized and thenormal display reappears after several seconds.When the settings are made using the buttonson the remote control unit, press theSURROUND PARAMETER button to finish.This is the screen when operated withthe remote control unit.This is the screen when operated withthe remote control unit.