Denon DVD-3910 Operating Instructions Manual

Also see for DVD-3910: Supplementary guide Operating instructions Specifications Specification Operating instructions

Contents

12ENGLISH(11) DVI connectionsConnection with equipment that has a DVI (Digital Visual Interface)-D connector permits the transfer of digitalimages.✽ When using display equipment that is not supported by the HDCP (content protection function), the imagewill not be output properly. (See the compatibility table.)✽ Make an audio connection also because an audio signal will not be output from the DVI-D connector.✽ Commercially-available DVI cables are available in 24-pin and 29-pin types. The DVD-3910 supports the 24-pinDVI-D cable, but the 29-pin DVI cable cannot be connected.AV-1Monitor equipped withDVI input connectors24P DVI-D cable(commercially available)DVI-D InputconnectorNOTE:HDMI and DVI connectors.• The table below indicates the compatibility of connections between the HDMI/DVI-D output connector of theDVD-3910 and monitors that support HDMI/DVI-D.Monitor withHDMI™Video/Audio*1™(Only Video)Monitor withDVI-D (HDCPcompatible)™(Only Video)*2™(Only Video)HDMI outputterminalDVI-D outputterminalMonitor withDVI-D (HDCPincompatible)xx*1 Among the monitors that support HDMI, somedo not support audio output (for example,projectors). In connections with equipment suchas this, audio signals are not output from theHDMI output connector. Use analog audiooutputs, DENON LINK, or IEEE 1394 connectorsto provide the audio output at “DIGITALINTERFACE SETUP” unde “SETUP”, set “HDMIAUDIO SETUP” to “2CH”.*2 When the set’s HDMI connector is connected toa DVI-D compatible monitor (HDCP compatible)with an HDMI-DVI converter cable (commerciallyavailable), the signals are output in digital RGB,regardless of the “HDMI/DVI SELECT” setting.To play the digital images and sounds of DVD video or DVD audio via an HDMI/DVI-D connection, itis necessary that both the player and monitor (or AV amplifier) support a copyright protectionsystem called HDCP (High-bandwidth Digital Content Protection System). HDCP is copy protectiontechnology that comprises data encryption and authentication of the partner equipment. The DVD-3910 supports HDCP. Please see the user’s manual of your monitor (or AV amplifier) for informationabout this.Copyright Protection System5 PART NAMES AND FUNCTIONS(1) Front PanelSee page 3.q Power ON/STANDBY button• Press once to set to the standby mode. Theindicator lights up in red.• Press again to turn the power on. Theindicator lights up in green.w Power indicator• This indicator lights when the power is on andwhen the power is in the standby mode.Light green:Power is onLight red :Power is in the standby modee Power switch• Press once to turn the power on.• Press again to set to the “OFF” position andturn the power off.r DENON LINK indicator• This indicator lights when the audio signals aretransferred by DENON LINK connections.t AL24 PLUS indicator• This indicator lights when the audio signals ofa DVD, etc., are being processed digitally withthe AL24 processing Plus.y Display• Information on the disc that is currently playingis shown on the display. (See page 13.)u Remote control sensori SELECT of HDMI/DVI button• Press this to set the video signal output fromthe HDMI connector or the DVI connector.(See page 28.)o FORMAT of HDMI/DVI button• Press this to set the video signal format fromthe HDMI connector or the DVI connector.(See page 28.)!0 VIDEO MODE button• Use this to instantly change the adjustmentmode of the stored video signals.The unit will return to the stored settingvalues when the power is switched off.(The setting values of this mode will not bestored.)• PICTURE MODE• PROGRESSIVE MODE• TV TYPENTSCMULTI PALAUTO1 AUTO2 VIDEO1 VIDEO2 VIDEO3STD M1 M2 M3 M4 M5480P/576P 720P 1080iHDMI Y Cb Cr HDMI RGBHDMI/DVI OFFDVI• SQUEEZE MODENo effective for interlaced image.(See page 21.)!1 Select the playback area/layer ofSUPER AUDIO CD(SUPER AUDIO CD SETUP)• Switch the area /layer of the Super audio CDSplayed with priory.• MULTI.......When playing Super audio CDs, theMulti channel area is played withpriory• STEREO ....When playing Super audio CDs,the stereo channel area is playedwith priority.• CD.............When playing Super audio CDs,the CDs layer area is played withpriority.!2 PURE DIRECT SELECT button• Press to switch the modes with the specificvideo signals and digital audio signals andindicate in display on and off. (See page 26.)!3 DVD/AUDIO/VIDEO logo• This indicator lights when playing the DVDaudio or DVD video.!4 Super Audio CD logo• This indicator lights when playing the Superaudio CD.!5 Disc tray• Load discs here. (See pages 15, 30.)• Press the OPEN/CLOSE button !6 to openand close the disc tray.• The disc tray is also closed when the PLAYbutton !8 is pressed.!6 OPEN/CLOSE button (5)• Press this to open and close the disc tray.(See pages 15, 30.)!7 STILL/PAUSE button (3)• Press this to pause images or music or to playimages frame by frame. (See page 31.)!8 PLAY button (1)• Press this to play the disc. (See page 30.)!9 STOP button (2)• Press this to stop the disc. (See page 31.)@0 Skip button (8)• Press this to move back to the beginning ofthe current track (or chapter).• Press again to move back to the beginning tothe previous track (or chapter). (See page 31.)NORMAL MODE 1 MODE 2 ALL OFFMULTI STEREO CDOFF ONDVD-3910