26ENGLISHON / STANDBYSUPERAUDIO CDSETUPSELECT FORMATPUREDIRECTSELECTVIDEO MODEPUSH ENTERHDMI / DVIDVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-3910STILL / PAUSEPLAY STOPOPEN/CLOSEDENON LINK AL 24 PLUS49 USING THE PURE DIRECT MODE2 In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby achieving highquality sound.1Press the PURE DIRECT MEMORY button on theremote control unit.• The output status of the video signals, etc., can bestored at MODE 1 and MODE 2 as desired.SELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEMARKERRANDOMDIMMERZOOMPICUREADJUSTSETUPMEMORYA-BREPEATSELECTRC-972PURE DIRECTDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPBACK LIGHTPOWER OFFPOWER ON241, 3PURE DIRECT MEMORYPURE D I RECT MODEPURE D I RECT MODE 1SE TUPDI G I T AL OUTPUTV I DEO OUTDI SPL AYONONONDEC I S I ON : ENTER BUT TONSE L ECT :MODE1MODE2MEMORY SELECTPURE DIRECTRemote control unit2Use the • and ª cursor buttons to select the mode,then press the ENTER button.DIGITAL OUTPUTON: Digital audio signals are output.OFF: Digital audio signals are not output.VIDEO OUTON: Video signals are output.OFF: Video signals are not output.DISPLAYON: It is indicate in Display of the main unit.OFF: It is not indicate in Display of the main unit.✽ When the video output is set to “OFF” or “ALLOFF”, neither HDMI video nor audio signals areoutput. Also, when the “HDMI AUDIO SETUP”is set to “MULTI (NORMAL)”, the digital outputsetting cannot be made. (See pages 18, 19.)✽ When DENON LINK and IEEE 1394 settings arevalid, the setting of DIGITAL OUTPUT cannot beselected.PURE DIRECT MEMORYPURE D I RECT MODEPURE D I RECT MODE 1SE TUPDI G I T AL OUTPUTV I DEO OUTDI SPL AYDEC I S I ON : ENTER BUT TONSE L ECT :MODE1ONOFFRemote control unitRemote control unitPress the PURE DIRECT MEMORY button on theremote control unit.• All of the settings are stored in the memory.3Remote control unitMEMORY SELECTPURE DIRECTPress the PURE DIRECT SELECT button on themain unit.The modes described below will appear on thedisplay.NORMAL: All signals are output normally.MODE 1: The settings stored for MODE 1 areused.The factory default settings are:“DIGITAL OUT”: “ON”“VIDEO OUT”: “ON”“DISPLAY”: “ON”MODE 2: The settings stored for MODE 2 are used.The factory default settings are:“DIGITAL OUT”: “ON”“VIDEO OUT”: “ON”“DISPLAY”: “ON”ALL OFF: No indicate in Display of the mainunit, video and digital signals are notout.(except analog audio output)4Main unitPUREDIRECTSELECTDisplay the setting mode10 USING THE SUPER AUDIO CD SETUP2 On a Super Audio CD, the stereo and multi – channel areas are separate.Hybrid discs comprise 2-layer structure of Super Audio CD layer and a CD layer.The area/layer can be set to be played with priority.ON / STANDBYSUPERAUDIO CDSETUPSELECT FORMATPUREDIRECTSELECTVIDEO MODEPUSH ENTERHDMI / DVIDVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-3910STILL / PAUSEPLAY STOPOPEN/CLOSEDENON LINK AL 24 PLUS1Display the setting mode1Press the SUPER AUDIO CD SETUP button.• The modes described below will appear on thedisplay.MULTI (FACTORY DEFAULT)When playing a Super Audio CD disc, the multi– channel area will be played back with priority.STEREOWhen playing a Super Audio CD disc, thestereo area will be played back with priority.CDWhen playing a Super Audio CD disc, the CDlayer will be played back with priority.✽ When playing back a disc that does nothave a selected area/layer, anotherarea/layer will be played backautomatically.SUPERAUDIO CDSETUPMain unitMULTISTEREOCD11 ADJUSTING THE PICTURE QUALITYSELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEMARKERRANDOMDIMMERZOOMPICUREADJUSTSETUPMEMORYA-BREPEATSELECTRC-972PURE DIRECTDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPBACK LIGHTPOWER OFFPOWER ON2, 3, 4, 5, 6, 711Press the PICTURE ADJUST button duringplayback or during pause.• The image quality adjustment screen willappear.STDReturns the settings to the factory defaultsettings.M1 TO M5Image quality settings that have been adjustedto your preference can be stored to 5memories, M1 to M5.SETSET permits set to setup level and setting ofthe screen display position (horizontal andvertical).P I CTURE MODESTD M1 M2 M3 M4 M5 SETPICTUREADJUSTRemote control unitMEMORY SELECTPURE DIRECTRemote control unit1SELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEDIMMERZOOMA-BURE DIRDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPBACK LIGHTPOWER OFFPOWER ONRemotecontrol unitSUPER AUDIOCD SETUP