37ENGLISHDVD MENU1. SUB TITLE2. AUDIO3. ANGLEDVD MENU1. SUB TITLE2. AUDIO3. ANGLEUsing the DVD Menu2 Some DVDs include special menus called DVD menus.For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languagesmay contain audio and subtitle language menus.These menus are called “DVD menus”.Here we describe the general procedure for using DVD menus.123During playback, press the MENU button.• The DVD menu appears.Use the cursor or number buttons to select the desireditem.• If you select the item using the number buttons, skipstep 3 below.Press the ENTER button.• The selected item is set.• If more menus appear, repeat steps 2 and 3.Example:Example:“AUDIO” is selectedSELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEMARKERRANDOMDIMMERZOOMPICUREADJUSTSETUPMEMORYA-BREPEATSELECTRC-972PURE DIRECTDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPBACK LIGHTPOWER OFFPOWER ON2132Remote control unitRemote control unitRemote control unitRemote control unitMENU20 MARKING SCENES YOU WANT TO SEE AGAIN2 Set marks at scenes you want to see again so that you can start playback from the marked position wheneveryou want.1During playback, press the MARKER button.• The marker screen appears.• Use the 0 and 1 cursor buttons to select the“ ” marks.• “ ” is displayed if the mark is not set.MARKERRemotecontrol unit2Press the ENTER button at the scene you want tomark.• A number is displayed.• Up to five marks can be set.(To select another marker, use the cursorbuttons (0, 1).) Remotecontrol unitSetting Marks (DVD-AUDIO / DVD-VIDEO)PROGR/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEMARKERRANDOMDIMMERZOOMPICUREADJUSTSETUPMEMORYA-BREPEATSELECTRC-972PURE DIRECTDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPBACK LIGHT1, 32, 31Calling Out Marked Scenes and Clearing Marks3Use the 0 and 1 cursor buttons to select the markernumber and press the ENTER button.• If the marker screen is not displayed during playback,press the MARKER button to display it.✽ To clear the marker display:Press the MARKER button.✽ To clear a marker:Use the 0 and 1 cursor buttons to select a marker numberand press the CLEAR button.• You can clear existing markers, but they are restored whenyou open the disc tray or switch the unit to standby.Remote control unit Remote control unitNOTES:• All the markers added with this unit are cleard when the unit is switched to standby or the disc tray isopened.• Depending on where the marker is set, subtitles may not be displayed.