Denon DVD-3910 Operating Instructions Manual

Also see for DVD-3910: Supplementary guide Operating instructions Specifications Specification Operating instructions

Contents

33ENGLISHPlaying a Certain Section Repeatedly (A-B Repeat Playback)SELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEMARKERRANDOMDIMMERZOOMPICUREADJUSTSETUPMEMORYA-BREPEATSELECTRC-972PURE DIRECTDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPBACK LIGHTPOWER OFFPOWER ON1, 212During playback, press the A-B button.• This sets start point A.Press the A-B button again.• This sets end point B, and repeat playback of the A-Bsection starts.A TO B SET A✽ To return to normal playback:Press the A-B button until “A TO B CANCELED” appears on the TV screen.NOTES:• Repeat playback may not work for some DVDs.• The repeat playback and A-B repeat playback functions will not work for DVDs and video CDs for whichthe elapsed time is not shown on the display during playback.• In some cases, subtitles may not be displayed near the A and B points during A-B repeat playback.A-BRemote control unitA TO B SET BA-BRemote control unitSUPERAUDIO CDSETUPSELECT FORMATPUREDIRECTSELECTVIDEO MODEPUSH ENTERHDMI / DVIDVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-3910STILL / PAUSEPLAY STOPOPEN/CLOSEDENON LINK AL 24 PLUS315 PLAYING TRACKS IN THE DESIRED ORDER2 Use this function with DVD-AUDIO discs, video CDs, Super audio CDs and music CDs to play the tracks inthe desired order.2 This function does not affect with DVD-VIDEO discs.12In the stop mode, press the PROGRAM/DIRECTbutton once.• The program selection screen appears.Use the number buttons to select the tracknumber you want to program.EX: To program track 5 and track 12:• With DVD-audio, group numbers can bespecified and programmed. Bonus tracks,however, cannot be programmed.✽ To return to normal playback:Press the STOP button to stop programmed playback, then press the PROGRAM/DIRECT button.Now press the PLAY button to start normal playback from the beginning of the disc.✽ To clear tracks from the program:Press the STOP button. The program play screen appears. Press the CLEAR button to clear the last trackin the program.✽ To clear the entire program:The entire program is cleared when the power is turned off or the disc is ejected.✽ To check the programmed contents, press the CALL button in the stop mode. The programmed contentsare displayed step by step.✽ Up to 20 tracks can be programmed.3 Press the PLAY button.• Playback of the tracks in the programmedorder begins.PLAYPLAYMain unit Remote control unitSELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEMARKERRANDOMDIMMERZOOMPICUREADJUSTSETUPMEMORYA-BREPEATSELECTRC-972PURE DIRECTDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPBACK LIGHTPOWER OFFPOWER ON213PROGRAMINPUT : 0 - 9, + 10 CL EAR : CL EAR BUTTONNO. TRACK1MODE : NORMAL TOTAL T IME : - - : - -PROGRAM/DIRECTRemote control unitPROGRAMME I NGANG : 0 - 9, + 10 LÖSCHEN : CL EAR - TASTENO. TRACK1 0 52 1 23 _ _MODUS : NORMAL GESAMTZEIT : 1 0 : 3 5Remote control unit