MGR10 A/B/C - Revision : I (for 7.0 software revision) 183.5 About the MGR10 Display screenThe liquid crystal graphic display clearly indicates the measured resistance and measurement status aswell as displaying available menu options and measurement analysis when selected.Figure 3.5.1 - Example of Resistance Measurement ModeThe keypad below the display screen controls the MGR10. Some keys perform a function directly. Forexample, selects 3m range.Other keys switch the display to configuration mode which allows you to select options through aseries of menus.The option menus all follow the same format. The configuration mode is indicated on the screen by adashed line displayed directly below the main reading. An instruction prompt under the dashed lineindicates the current menu. The available menu options are displayed on the bottom row of the displayas shown in figure 3.5. Press the corresponding function key to select an option.AUTO1: 30m 10.0A (AVE) Slow+ 18.000 mT= +20.0C (EXT) R 20 = 18.006m (Cu)Meas Cont03m
