MGR10 A/B/C - Revision : I (for 7.0 software revision) 234.3 Measurement ModePress on :to select the measurement mode options.For the greatest flexibility and versatility of measurement the MGR10 has many advanced featureswhich can be selected from this menu.The km function gives the possibility to display the measured resistances on a known length ofcables computed to the value for 1 kilometer. :Press on [] to select a resistance display in Ohms ( standard display ) /km :Press on [ /km] to select a resistance display in Ohms per kilometer Press on [ No. ] to modify the number of cable connected in series or parallelo Enter a number between 1 and 99 with the numeric keypado Press on [OK] to enter the value Press on [ Len ] to modify the cable lengtho Enter the value according to unity with the numeric keypado Press on [OK] to enter the value Press on [ Unit ] to select Meter or Kilometero Press on [ meter ] or [ km]o Press on [OK] to enter the selection Press on [ Conn ] to define if the cables are series or parallel connected .o Press on [ Ser ] or [ Par ]o Press on [OK] to enter the selection Press on [OK] to go back to the previous page-------DISPLAY------- Trig Readkm km Mode Rate Filt Sett Quit8MODEMODE