MGR10 A/B/C - Revision : I (for 7.0 software revision) 364.7 General setup menuPressto select the setup menuRESET : Press [RESET] to reset the measurement parameters with default values . This function is suitablewhen the operator doesn’t know how to set the parameters to perform a measurement . Confirm the reset by pressing [Yes] Or escape the menu by pressing [No]Mem : Press [Mem] to reach the10 parameter memories control menu Press [RCL] to recall an existing memory number Enter the memory number between 0 and 9 with the numeric keypad , the parameters areimmediately loaded in the unit operating memory . Press [STO] to save a parameter set in a memory location Enter the memory number between 0 and 9 with the numeric keypad . If the memory location isalready occupied with parameters , the display will ask to confirm overwriting . Press [Yes ] or [No] Press [List] to get the memory list :Mem 0 In use Mem 5 FreeMem 1 In use Mem 6 FreeMem 2 In use Mem 7 FreeMem 3 In use Mem 8 FreeMENUMENUSet Rem KeyRESET Mem Lcd Up I/F Lock Quit >>
