Eaton PowerXL DX-NET-ETHERNET2-2 User Manual

Also see for PowerXL DX-NET-ETHERNET2-2: Instruction leaflet

12User Manual MN040024ENEffective November 2016DX-NET-ETHERNET2-2 field bus connectionEtherNet/IP for variable frequency drive DE1/DC1EATON www.eaton.comNetwork Settings (Class 0xF5)The Network Settings page provides the Class 0xF5 data for assigning the Module addressing parameters.All these values with a factory Default value indicate a current configured value and a working value. TheWorking value is applied as configured once the Set button is pressed.• Configuration Method – defines the module using a Static or DHCP IP address.• DNSENabled – defines the module use of a DNS server or not.• IP Address – defines the IP address of the module.• Network Mask – defines the subnet mask of the network.• Gateway Address – defines the address of the connected gateway.• Name Server – defines the Server 1 address location• Name Server 2 – defines the Server 2 address location• Domain Name – defines the network domain name used.• Host name – defines the module host name on the network.• Encapsulation Inactivity timeout – defines the communication timeout time when a connection is lost.Drive Identity (Class 0x01)Provides information on the device that the module is connected to and the firmware version in it.• CIP Device ID – defines the connected device ID on the module.• CIP Device Name – defines the communication type used on the device.• Modbus Vendor Name – defines the vendor of the device connected.• Modbus Product Code – defines the device name connected to the network.• Modbus Version Number – defines the connected device firmware version between