Eaton PowerXL DX-NET-ETHERNET2-2 User Manual

Also see for PowerXL DX-NET-ETHERNET2-2: Instruction leaflet

1User Manual MN040024ENEffective November 2016DX-NET-ETHERNET2-2 field bus connectionEtherNet/IP for variable frequency drive DE1/DC1EATON www.eaton.comPowerXL series overviewAbout this manualThis manual describes the EtherNet/IP connection DX-NET-Ethernet2-2 for the variable frequency drives of the DE1 andDC1 Enhanced (DC1-E) device series. The DX-NET-Ethernet2-2will not work with the standard DC1 unit or the IP66 version ofthe DC1 Enhanced.It is aimed for experienced drive specialists and automationtechnicians. A thorough knowledge of the EtherNet/IP fieldbusand the programming of a EtherNet/IP master is required.Knowledge of handling the DE1 and DC1-E variable frequencydrive is also required.Target groupThe content of MN040024EN manual is written for electricalengineers and automation technicians. A specialist knowledgeof electrical engineering and fundamental technical principlesis needed for commissioning. In addition you should be familiarwith the handling of the EtherNet system.Further manuals for this deviceFurther information can be found in the following manuals:On the topic “Variable frequency drive“• DC1 – MN040022_EN• DC1 Enhanced – MN040023EN• DE1 – MN040011ENWriting conventionsSymbols used in this manual have the following meanings:x Indicates instructions to be followed.Hazard warnings of material damagesNOTICE: Warns about the possibility of material damage.Hazard warnings of personal injurym CAUTIONWARNS OF THE POSSIBILITY OF HAZARDOUS SITUATIONS THAT MAYPOSSIBLY CAUSE SLIGHT INJURY.m WARNINGWARNS OF THE POSSIBILITY OF HAZARDOUS SITUATIONS THAT COULDRESULT IN SERIOUS INJURY OR EVEN DEATH.m DANGERWARNS OF HAZARDOUS SITUATIONS THAT RESULT IN SERIOUS INJURYOR DEATH.Tips Indicates useful tips. In order to make it easier to understand some of the imagesincluded in this manual, the housing of the variable frequencydrive, as well as other safety-relevant parts, have been left out.However, it is important to note that the variable frequency drivemust always be operated with its housing placed properly, as wellas with all required safety-relevant parts. All the specifications in this manual refer to the hardware andsoftware versions documented in it.