Eaton PowerXL DX-NET-ETHERNET2-2 User Manual

Also see for PowerXL DX-NET-ETHERNET2-2: Instruction leaflet

37User Manual MN040024ENEffective November 2016DX-NET-ETHERNET2-2 field bus connectionEtherNet/IP for variable frequency drive DE1/DC1EATON www.eaton.comAppendix B—Firmware upgradeEnabling Windows TFTP clientIf the PC has never been used for firmware upgrades before, then the Windows TFTP Clientwill need to be enabled.• Start Menu A Control Panel A Programs and Features• Select ‘Turn Windows features on or off’• If not already selected, enable ‘TFTP Client’Performing firmware upgradex Confirm that the firmware upgrade package contains thefollowing files, where ‘aaabbbSccc’ indicate the release version:• APP_DX-NET-ETHERNET2-2_aaabbbSccc.cfg• APP_DX-NET-ETHERNET2-2_aaabbbSccc.aes• Upgrade_APP_DX-NET-ETHERNET2-2.batx the ‘aaabbbSccc’ values of the .cfg and .aes files must matchx Set the IP address of the DX-NET-ETHERNET2-2 to its defaultsettings, either via an Identity Class Type 1 reset or via theWebserver. The values should be as follows:• Configuration Method = Static• IP Address: 192.168.1.254• Network Mask: 255.255.255.0x Upgrade_APP_DX-NET-ETHERNET2-2.batx APP_DX-NET-ETHERNET2-2_aaabbbSccc.cfg will be transferred,during which the module indicators will be illuminated as per‘PBL Stage 2: Receiving application configuration’x Once the Transfer of APP_DX-NET-ETHERNET2-2_aaabbbSccc.cfgis complete, the module indicators will be illuminated ‘PBL Stage3: Awaiting application data’x APP_DX-NET-ETHERNET2-2_aaabbbSccc.aes will be transferred,during which the module indicators will be illuminated as per‘PBL Stage 3: Awaiting application data’x Once the Transfer of APP_DX-NET-ETHERNET2-2_aaabbbSccc.cfgis complete, the module return to ‘Normal Running’ conditionsx Firmware upgrade has been applied