Eaton PowerXL DX-NET-ETHERNET2-2 User Manual

Also see for PowerXL DX-NET-ETHERNET2-2: Instruction leaflet

29User Manual MN040024ENEffective November 2016DX-NET-ETHERNET2-2 field bus connectionEtherNet/IP for variable frequency drive DE1/DC1EATON www.eaton.comTable 16. Class 0x0F Parameter (Request individual 16 bit registers), continuedDrive Mode Type Inst. Readservice WriteservicePara. DescriptionP-20 Fixed frequency FF1 / speed 1 R/W U16 148 0x0E 0x10P-21 Fixed frequency FF2 / speed2 R/W U16 149 0x0E 0x10P-22 Fixed frequency FF3 / speed 3 R/W U16 150 0x0E 0x10P-23 Fixed frequency FF4 / speed 4 R/W U16 151 0x0E 0x10P-24 Second deceleration time (dec2) R/W U16 152 0x0E 0x10P-25 AO1 signal (Analog Output) R/W U16 153 0x0E 0x10P-26 Frequency skip 1, bandwidth (hysteresis range) R/W U16 154 0x0E 0x10P-27 Frequency skip 1, center R/W U16 155 0x0E 0x10P-28 V/Hz characteristic curve modification voltage R/W U16 156 0x0E 0x10P-29 V/Hz characteristic curve modification frequency R/W U16 157 0x0E 0x10P-30 REAF, Start function with automatic restart,control signal terminals R/W U16 158 0x0E 0x10P-31 Start function with automatic restart,operating unit. R/W U16 159 0x0E 0x10P-32 DC current braking R/W U16 160 0x0E 0x10P-33 Motor pick-up control function (to catch spinningmotors) (in sizes FS2 and FS3) / DC braking,braking time at start (in size FS1)R/W U16 161 0x0E 0x10P-34 Brake chopper activation (in sizes FS2 and FS3) R/W U16 162 0x0E 0x10P-35 Analog input 1 scaling R/W U16 163 0x0E 0x10P-36 Serial communication configuration R/W U16 164 0x0E 0x10P-37 Access code definition R/W U16 165 0x0E 0x10P-38 Parameter access lock R/W U16 166 0x0E 0x10P-39 Offset for analog input 1 R/W U16 167 0x0E 0x10P-40 Speed display scaling factor R/W U16 168 0x0E 0x10P-41 PI controller, proportional gain R/W U16 169 0x0E 0x10P-42 PI controller, integral time R/W U17 170 0x0E 0x10P-43 PI controller, operating mode R/W U18 171 0x0E 0x10P-44 PI controller, reference value/setpoint value R/W U19 172 0x0E 0x10P-45 PI digital setpoint value R/W U20 173 0x0E 0x10P-46 PI controller, feedback R/W U21 174 0x0E 0x10P-47 Analog input 2 (AI2), signal range R/W U22 175 0x0E 0x10P-48 Standby-time R/W U23 176 0x0E 0x10P-49 PI controller, feedback wakeup level R/W U24 177 0x0E 0x10P-50 CANopen Baud rate R/W U25 178 0x0E 0x10P-51 Motor overload protection R/W U26 179 0x0E 0x10P-52 Parameter access R/W U27 180 0x0E 0x10P-53 Reaction to the communication fault R/W U28 181 0x0E 0x10