Eaton PowerXL DX-NET-ETHERNET2-2 User Manual

Also see for PowerXL DX-NET-ETHERNET2-2: Instruction leaflet

iiiUser Manual MN040024ENEffective November 2016DX-NET-ETHERNET2-2 field bus connectionEtherNet/IP for variable frequency drive DE1/DC1EATON www.eaton.comDisclaimer of warranties and limitation of liabilityThe information, recommendations, descriptions, and safety notations in this document are basedon Eaton’s experience and judgment and may not cover all contingencies. If further information isrequired, an Eaton sales office should be consulted. Sale of the product shown in this literatureis subject to the terms and conditions outlined in appropriate Eaton selling policies or othercontractual agreement between Eaton and the purchaser.THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED,INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY,OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY EXISTING CONTRACT BETWEEN THEPARTIES. ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON. THE CONTENTSOF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEENTHE PARTIES.In no event will Eaton be responsible to the purchaser or user in contract, in tort (includingnegligence), strict liability, or otherwise for any special, indirect, incidental, or consequentialdamage or loss whatsoever, including but not limited to damage or loss of use of equipment, plantor power system, cost of capital, loss of power, additional expenses in the use of existing powerfacilities, or claims against the purchaser or user by its customers resulting from the use of theinformation, recommendations, and descriptions contained herein. The information contained inthis manual is subject to change without notice.Cover Photo: DX-NET-ETHERNET2-2