Eaton PowerXL DX-NET-ETHERNET2-2 User Manual

Also see for PowerXL DX-NET-ETHERNET2-2: Instruction leaflet

32User Manual MN040024ENEffective November 2016DX-NET-ETHERNET2-2 field bus connectionEtherNet/IP for variable frequency drive DE1/DC1EATON www.eaton.comCreating a project in RSLogix5000Create a project in RSLogix5000. Give the project a name and select the controller type, per the following:Select OK to create the project.Install EDS files for Eaton products into RSLogix5000There is an EtherNet/IP EDS file for all Eaton EtherNet/IP products, compatible with RSLogix5000,version 20 or later. These files can be installed into the RSLogix5000 software via the following:1. Download the EDS files for Eaton EtherNet/IP products from the following link: www.eaton.com/drives.The eds files are under OEM Drives, then either under the PowerXL DE1 or PowerXL DC1. Downloadand save the eds files on your hard drive.2. Select the Tools drop down menu in RSLogix5000.3. Select EDS Hardware Installation Tool.4. Follow the installation wizard, browsing for the EDS file previously saved to your hard drive.Once the EDS file has been installed into RSLogix5000, the DC1/DE1 drive can be added to anEtherNet/IP network, per the following.