Installing the Ergonomic WorkstationAttach Leg Assemblies to BaseFollow these instructions to attach the left and right leg assembly to its respective base support.1. Align the right leg assembly with the right base support.Leg AssemblySupport CoverLeg AssemblyBase Supports(Left and Right)2. Insert eight Phillips head thread form screws (66714) and tighten as shown below.Step Step (8x)3. Repeat step 1 to align the left leg assembly to the left base support.4. Repeat step 2 to tighten the screws to the left leg assembly.13 Eaton Profile Genesys Dual-Lift Ergonomic Workstation Installation wwww.eaton.com/powerquality 11-41 06-2011