Eaton XN-GWBR Series User Manual

5 Implementation of EtherNet/IP5.3 VSC-Vendor Specific Classes100 XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com107(6Bh)Module type ID G ENUMUSINTDescribes the module type: see attribute107 (6Bh) on page 86108(6Ch)Modulecommand inter-faceG/S ARRAY The control interface of the XI/ON module.ARRAY OF:BYTE: Control byte sequence109(6DhModule responseinterfaceG ARRAY Response interface of the XI/ON module.ARRAY OF:BYTE: Response byte sequence110(6Eh)Module regis-tered indexG ENUMUSINTContains the index numbers specified in allthe module lists.111(6Fh)Number ofsupportedchannelsG USINT States the number of analog input channelssupported by this module Instance.112 -119(70h -77h)Produced data G INT Contains the data received by the analoginput module of channels No. 1 to No. 8.Only those channels are supported that arecontained in attribute 111, "Number ofsupported channels".Attribute 112 contains the data for channel1, attribute 119 for channel 8.120 -127(78h -7Fh)Diag data G BYTE Contains the diagnostic data of the channels1 to 8 of the analog input module.Only those channels are supported that aredefined in attribute 111, "Number ofsupported channels".Attribute 120 contains the data for channel1, attribute 127 for channel 8.BYTE diag:Bit 0:0 = ok1 = measurement value range errorBit 1:0 = ok1 = open circuitBit 2:0 = ok1 = short-circuitTable 53:Object instanceAttr.no.dec.(hex.)Attribute name Get/SetType Description