Eaton i-on style Engineering Manual

Also see for i-on Style: Guide

Contents

Detectors/Devices MenuPage 38Internal SoundersThis menu allows you to add, delete and edit internal radio sounders.See Table 1 on page 2 for the maximum number of internal radio sounders per controlunit.Add/Del SounderTo add or remove an internal radio sounder, select Add/Del Sounder, then choose one ofthe sounder numbers (names). If you are adding a sounder, activate the tamper switch(please refer to the sounder's installation instructions).Edit SounderThis contains:NameAllows you to name the device.Partitions (partitioned system only)This has the same purpose as allocating partitions to an external radio siren (seeabove).WAMsEach control unit can learn the maximum number of WAMs given in Table 1 on page 2.Although the WAM provides five different modes, only mode 1, repeater module, isrelevant. The installer must select the repeater mode when commissioning the WAMhardware.When working as a repeater module, the WAM repeats the signals from any detectorswithin its range, amplifying them to a level that the control unit can detect. This allows youto increase the area covered by radio detectors.Note: A WAM cannot repeat signals for other radio devices.Use Edit WAM to give each WAM a meaningful name. The name can be up to 12characters long.CamerasYou can use this option to add up to four network (IP) cameras. When a specified trigger(event) occurs, the control unit acquires JPEG images from the camera and saves them toa locally-fitted SD card (purchased separately). For each trigger, 15 images are saved:one image per second for 5 seconds prior to the event, and one image per second for 10seconds after the event.Note: If you set up a corresponding email trigger (page 92), the control unit sends theimages by email to specified recipients. Stored images can be viewed through the web interface, using the SecureConnectapp, or by inserting the SD card into a computer. Before using this option, set up each camera as described in the camera installationinstructions. The control unit periodically polls each camera and reports if there is no response.