Eaton i-on style Engineering Manual

Also see for i-on Style: Guide

Contents

System Options MenuPage 79Note: The upgrade may default the control unit's configuration settings. Before usingPanel Upgrade, it is recommended that you back up the system configuration using theDownloader software or the web interface.Note: If you need to update both the language files and firmware, make sure youupdate the language files first. Failure to do this may display an “incompatiblelanguage file” message, from which you cannot proceed.Selecting a file begins the upgrade process. During the upgrade, the control unit will restartand the keypad's navigation LEDs may flash red. After the upgrade, the keypad returns tonormal standby mode.SD CardBefore removing a micro-SD card from the control unit, you must use System Options/SDCard/Safely Remove Hardware. After re-inserting the card, select System Options/SDCard/Enable Hardware. Failure to use this procedure may corrupt the card or cause it tomalfunction.