Fancom Lumina 35 Installation Manual

Lumina 35 Installer33This chapter explains all the options in the INSTALLER menu.In the combi-table the relationship between ventilation and air inlets for the entire ventilation course is entered.For more information about the combi-table, see “Combi-table page 7”.All the positions in the combi-table must be fully entered. Even if natural ventilation is used, the relays atthese positions must be assigned. This prevents ventilation being completely switched off if the user(temporarily) switches off natural ventilation.The screens for the M/MT-phase are explained below. The same screen explanation applies to the T-phase.INSTALLER → VENTILATION → COMBI MTT → M/MT-phase (min) → tab page ExhaustPosition % Setting of the ventilation percentage at which fans should activate/deactivate and airinlets open/close. The ventilation percentages must increase from the lowest to thehighest position.The combi positions are also used for natural ventilation.