Fancom Lumina 35 Installation Manual

Lumina 35 Installer45Relay type* Setting of the passive (not controlled) relay status.• N.O. (normally open) if it makes no contact.• N.C. (normally closed) if it makes contact.INSTALLER → CLOCKS → LIGHT → tab page CommonDescription Setting of the name of the function.Time clock type Setting indicating how the user can use the clock:• ON/OFF: User enters on/off times.• ON/DURATION: User enters time and duration of activation.• INTERMIT: Intermittent repeat clock. An intermittent light clock can be used toperiodically repeat a certain light pattern. For example, at the beginning of eachhour the lights can be controlled on for 15 minutes, then switched off for the other45 minutes. Enter the required time settings in the user's menu.Light relay Setting of the digital output address (relay) that controls the lighting. This relayswitches the light on and off and can also be used to overrule the control in percent (analog output). This is important in order to switch off the lighting completely if thelight level, for example, falls below a certain level (Relay off below).Relay type Setting of the passive (not controlled) relay status.• N.O. (normally open) if it makes no contact.• N.C. (normally closed) if it makes contact.