4-44 C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUALFRONT PANEL INTERFACE CHAPTER 4: INTERFACES4Figure 4-52: Enhanced front panel label designer4. Enter the text to appear next to each LED and above each user-programmable pushbutton in the fields provided. TheLED Offsets and Button Offsets buttons move all labels left/right and up/down on the page (they both do the sameaction, so use either button). The Button Offsets button does not display when there are no pushbuttons to customize.5. Feed the UR front panel label cutout sheet into a printer and press the Print button in the front panel report window.6. When printing is complete, fold the sheet along the perforated lines and punch out the labels.7. Remove the UR label insert tool from the package and bend the tabs as described in the following procedures. Thesetabs are used for removal of the default and custom LED labels.The label package shipped with every C60 contains the three default labels, the custom label template sheet, and the labelremoval tool.If the default labels are suitable for your application, insert them in the appropriate slots and program the LEDs to matchthem. If you require custom labels, use the following procedures to remove the original labels and insert the new ones.Use the tool with the printed side containing the GE part number facing the user.
