5-76 C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUALPRODUCT SETUP CHAPTER 5: SETTINGS5– "On" value defaults the input to logic 1– "Off" value defaults the input to logic 0– "Latest/On" freezes the input in case of lost connectivity. If the latest state is unknown, such as after UR power-upbut before the first communication, the input defaults to logic 1. When communication resumes, the inputbecomes fully operational.– "Latest/Off" freezes the input in case of lost connectivity. If the latest state is unknown, such as after UR power-upbut before the first communication, the input defaults to logic 0. When communication resumes, the inputbecomes fully operational.RxGOOSE Boolean1 EVENTSRange: Disabled, EnabledDefault: DisabledThis setting selects whether Off to On transitions of the RxGOOSE Boolean1 FlexLogic operand are recorded by the eventrecorder. If set to Enabled, Off to On transitions are recorded. On to Off transitions are never recorded, even if events areenabled.RxGOOSE DPS inputsNavigate to Settings > Product Setup > Communications > IEC 618560 > GOOSE > RxGOOSE > RxGOOSE DPS Inputs.There are Add IED and Remove IED buttons. The Add IED button allows SCL files to be used, including ICD, CID, and SCD(supported in version 7.40 and later). When the file format is SCD, the system lists all IEDs inside the SCD file and lets theuser select the ones to add.Figure 5-30: RxGOOSE DPS Inputs panelRxGOOSE DPS1 IDRange: 0 to 20 charactersDefault: RxG DPS1This setting allows the user to assign descriptive text to the names of the four RxGOOSE DPS1 FlexLogic operands. Thefull operand name is the value of this setting appended with "Interm," "On," "Off," or "Bad." The standard and enhancedfront panels display the first 13 characters of this setting plus the state suffix to fit the 20 character display.RxGOOSE DPS1 RxGOOSERange: None, RxGOOSE1, RxGOOSE2, and so onDefault: NoneThis setting selects the GOOSE message containing the value that drives the RxGOOSE DPS1 FlexLogic operand. If set toNone, the RxGOOSE DPS1 FlexLogic operand assumes its default state.
