D25User's Manual GE Grid Solutions118 994-0081-3.00-21 GE InformationModule Replacement, ContinuedRemove the Front Panel5 With the ribbon cabledisconnected, shift the panelto the right.6 Pull the panel towards thefront to disengage the panelfrom the slots in the lowerfront edge of the enclosure.The panel will now be free of theenclosureMain BoardProcedure:WESDACBoard RemovalHow to remove the WESDAC board.Before starting this procedure, see above: Disassembling the D25.Step Action1 Locate and loosen the captive screws that hold the metal mountingplate in the D25 housing.2 Pull the metal mounting bracket at both sides of the WESDACBoard to disconnect connectors on back of board.3 Tilt the module slightly so that the metal housing does not obstructits removal.4 Carefully slide the mounting plate and attached WESDAC Boardout of the housing.WESDACBoard RemovalGrasp Mounting BracketHandles
