D25User's Manual GE Grid Solutions62 994-0081-3.00-21 GE InformationTypes of InputsImplementedon HighCurrent KECard (HCKE)• 1 Form C (Control Outputs #1 through #8)NO C NC1 Form C• 1 Form A (Control Outputs #9 through #24)A B1 Form A• 1 Form A with Current Monitoring (Control Outputs #25 through #32)C NO NO >I1 Form A with CurrentMonitoring CircuitCurrentMonitor• When current supervision is required, the load shall be connected betweenterminals C and NO >I. Otherwise the load should be connected betweenterminals C and NO of the appropriate channel• When current supervision is required, the load must be wired to terminal C andNO >I of channels 25 to 32.Table:Connector G1& G2 Pinoutson HCKED25 High Current KE Digital Output Connections: Pinouts for FACE-40Connector G1 and G2, outputs 1 to 32.Connector G1 Connector G2Pin Signal Description Pin Signal DescriptionG1-1 1NO Channel # 1 NO terminal G2-1 17A Channel # 17 NO A terminalG1-2 1C Channel # 1 Common terminal G2-2 17B Channel # 17 NO B terminalG1-3 1NC Channel # 1 NC terminal G2-3 18A Channel # 18 NO A terminalG1-4 2NO Channel # 2 NO terminal G2-4 18B Channel # 18 NO B terminalG1-5 2C Channel # 2 Common terminal G2-5 19A Channel # 19 NO A terminalG1-6 2NC Channel # 2 NC terminal G2-6 19B Channel # 19 NO B terminalG1-7 3NO Channel # 3 NO terminal G2-7 20A Channel # 20 NO A terminal
