4-22 F60 Feeder Protection System GE Multilin4.2 FACEPLATE INTERFACE 4 HUMAN INTERFACES44. Slide the new user-programmable pushbutton label inside the pocket until the text is properly aligned with the buttons,as shown below.b) STANDARD FACEPLATECustom labeling of an LED-only panel is facilitated through a Microsoft Word file available from the following URL:http://www.gedigitalenergy.com/products/support/ur/GET-8494A.docThis file provides templates and instructions for creating appropriate labeling for the LED panel. The following proceduresare contained in the downloadable file. The panel templates provide relative LED locations and located example text (x)edit boxes. The following procedure demonstrates how to install/uninstall the custom panel labeling.1. Remove the clear Lexan Front Cover (GE Multilin part number: 1501-0014).2. Pop out the LED module and/or the blank module with a screwdriver as shown below. Be careful not to damage theplastic covers.3. Place the left side of the customized module back to the front panel frame, then snap back the right side.4. Put the clear Lexan front cover back into place.Push inand gently liftup the cover.F60 FEEDER MANAGEMENT RELAYF60 FEEDER MANAGEMENT RELAYF60 FEEDER MANAGEMENT RELAYF60 FEEDER MANAGEMENT RELAY R842771A1.CDRF60 FEEDER MANAGEMENT RELAY( LED MODULE ) ( BLANK MODULE )R842722A1.CDR
