GE F60 Instruction Manual

Also see for F60: Communications manual Communications guide Instruction manual Instruction manual Instruction manual

Contents

2-14 F60 Feeder Protection System GE Multilin2.1 INTRODUCTION 2 PRODUCT DESCRIPTION22.1.4 REPLACEMENT MODULESReplacement modules can be ordered separately. When ordering a replacement CPU module or faceplate, provide theserial number of your existing unit.Not all replacement modules may be applicable to the F60 relay. Only the modules specified in the order codes areavailable as replacement modules.Replacement module codes are subject to change without notice. See the ordering page athttp://www.gedigitalenergy.com/multilin/order.htm for the latest F60 ordering options.The replacement module order codes for the horizontal mount units are shown below.Table 2–8: ORDER CODES FOR REPLACEMENT MODULES, HORIZONTAL UNITSUR - ** - *POWER SUPPLY (redundant supply only available inhorizontal units; must be same type as main supply)| RH H | Redundant 125 / 250 V AC/DC| RL H | Redundant 24 to 48 V (DC only)CPU | T | RS485 with 3 100Base-FX Ethernet, multimode, SFP with LC| U | RS485 with 1 100Base-T Ethernet, SFP RJ-45 + 2 100Base-FX Ethernet, multimode, SFP with LC| V | RS485 with 3 100Base-T Ethernet, SFP with RJ-45FACEPLATE/DISPLAY | 3C | Horizontal faceplate with keypad and English display| 3D | Horizontal faceplate with keypad and French display| 3R | Horizontal faceplate with keypad and Russian display| 3A | Horizontal faceplate with keypad and Chinese display| 3P | Horizontal faceplate with keypad, user-programmable pushbuttons, and English display| 3G | Horizontal faceplate with keypad, user-programmable pushbuttons, and French display| 3S | Horizontal faceplate with keypad, user-programmable pushbuttons, and Russian display| 3B | Horizontal faceplate with keypad, user-programmable pushbuttons, and Chinese display| 3K | Enhanced front panel with English display| 3M | Enhanced front panel with French display| 3Q | Enhanced front panel with Russian display| 3U | Enhanced front panel with Chinese display| 3L | Enhanced front panel with English display and user-programmable pushbuttons| 3N | Enhanced front panel with French display and user-programmable pushbuttons| 3T | Enhanced front panel with Russian display and user-programmable pushbuttons| 3V | Enhanced front panel with Chinese display and user-programmable pushbuttonsDIGITAL INPUTS AND OUTPUTS | 4A | 4 Solid-State (no monitoring) MOSFET outputs| 4B | 4 Solid-State (voltage with optional current) MOSFET outputs| 4C | 4 Solid-State (current with optional voltage) MOSFET outputs| 4D | 16 digital inputs with Auto-Burnishing| 4L | 14 Form-A (no monitoring) Latching outputs| 67 | 8 Form-A (no monitoring) outputs| 6A | 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs| 6B | 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs| 6C | 8 Form-C outputs| 6D | 16 digital inputs| 6E | 4 Form-C outputs, 8 digital inputs| 6F | 8 Fast Form-C outputs| 6G | 4 Form-A (voltage with optional current) outputs, 8 digital inputs| 6H | 6 Form-A (voltage with optional current) outputs, 4 digital inputs| 6K | 4 Form-C and 4 Fast Form-C outputs| 6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs| 6M | 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs| 6N | 4 Form-A (current with optional voltage) outputs, 8 digital inputs| 6P | 6 Form-A (current with optional voltage) outputs, 4 digital inputs| 6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs| 6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs| 6T | 4 Form-A (no monitoring) outputs, 8 digital inputs| 6U | 6 Form-A (no monitoring) outputs, 4 digital inputs| 6V | 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputsCT/VT MODULES(NOT AVAILABLE FOR THE C30)| 8L | Standard 4CT/4VT with enhanced diagnostics| 8N | Standard 8CT with enhanced diagnostics| 8M | Sensitive Ground 4CT/4VT with enhanced diagnostics| 8R | Sensitive Ground 8CT with enhanced diagnostics| 8Z | HI-Z 4CTINTER-RELAY COMMUNICATIONS | 2A | C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode| 2B | C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode| 2E | Bi-phase, single channel| 2F | Bi-phase, dual channel| 2G | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel| 2H | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels| 72 | 1550 nm, single-mode, LASER, 1 Channel| 73 | 1550 nm, single-mode, LASER, 2 Channel| 74 | Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER| 75 | Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER| 76 | IEEE C37.94, 820 nm, multimode, LED, 1 Channel| 77 | IEEE C37.94, 820 nm, multimode, LED, 2 Channels| 7A | 820 nm, multi-mode, LED, 1 Channel| 7B | 1300 nm, multi-mode, LED, 1 Channel| 7C | 1300 nm, single-mode, ELED, 1 Channel| 7D | 1300 nm, single-mode, LASER, 1 Channel| 7E | Channel 1 - G.703; Channel 2 - 820 nm, multi-mode| 7F | Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode| 7G | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED| 7H | 820 nm, multi-mode, LED, 2 Channels| 7I | 1300 nm, multi-mode, LED, 2 Channels| 7J | 1300 nm, single-mode, ELED, 2 Channels| 7K | 1300 nm, single-mode, LASER, 2 Channels| 7L | Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED| 7M | Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED| 7N | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED| 7P | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER| 7Q | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER| 7R | G.703, 1 Channel| 7S | G.703, 2 Channels| 7T | RS422, 1 Channel| 7W | RS422, 2 ChannelsTRANSDUCERINPUTS/OUTPUTS| 5A | 4 dcmA inputs, 4 dcmA outputs (only one 5A module is allowed)| 5C | 8 RTD inputs| 5D | 4 RTD inputs, 4 dcmA outputs (only one 5D module is allowed)| 5E | 4 dcmA inputs, 4 RTD inputs| 5F | 8 dcmA inputsNOTENOTE