To enter data in a data field:1. Use the Rocker key to highlight the desiredfield and press ENTER.2. Press Up or Down onthe Rocker key to selectcharacters. Press Rightto move to the nextcharacter or press Leftto move back to theprevious character. Ifthere are two lines ofdata, keep pressing Rightto drop to the next line.3. After entering the desireddata, press ENTER.TIP: To clear the entire data field, highlight theleft-most character field and press Left oncemore on the Rocker key.Not all fields are programmable. When you are on apage with fields that are not selectable, the highlightskips over them.Using the DatabasesOptional Garmin MapSource® CD-ROMs enhancethe versatility of your 76CS Plus. With optionalMapSource City Select® data, you can view listings ofnearby restaurants, lodging, shopping centers, attrac-tions and entertainment, and even retrieve addressesand phone numbers for any listed location.The included USB Interface Cable or an optional PCInterface Cable (with a serial connector) is used totransfer MapSource CD-ROM data to the unit.Note that you must install the included MapSourceTrip and Waypoint Manager software before you canconnect your USB cable to your computer.For a list of compatible MapSource products, refer tohttp://www.garmin.com/cartography/.Entering data76CS Plus Owner’s Manual 13GETTING STARTED > U SING THE 76CS P LUS190-00507-00_0A.indd 13 2/14/2005 3:33:18 PM
