Setting the TimeThe Time Setup page allows you to set thetime format and zone. You can also set theunit to conform to Daylight Saving Time.To open the Time Setup page, press MENU threetimes, select Time, and press ENTER. The currenttime and date are displayed at the bottom of the page.Time SetupIf the incorrect date is displayed, press MENU, high-light Set Date, and press ENTER. You will then beprompted to enter the current year. The 76CS Pluswill use this information when gathering satellite datato display the correct date.Customizing the UnitsThe Units Setup page allows you to customizemeasurement units for the entire system. Toopen the Units Setup page, press MENU threetimes to open the Setup Menu. Select Unitsand press ENTER.Restoring DefaultsMany pages allow you to restore the default settings(the original factory settings).To restore defaults:1. Open the page you want to restore to thefactory defaults.2. Press MENU.3. Highlight RestoreDefaults and pressENTER.To restore all of unit’s settingsto the defaults, hold the PAGEand ENTER keys and turn onthe unit. This will erase all userdata, such as waypoints. Restoring Defaults76CS Plus Owner’s Manual 81C USTOMIZING YOUR 76CS P LUS > SETTING UP THE SYSTEM190-00507-00_0A.indd 81 2/14/2005 3:33:52 PM
