September 2016 Service ManualPlatformPart No. 38139 AWP Super Series • IWP Super Series 103Platform7-1 Platforms7-1PlatformsHow to Remove an AluminumPlatform1 Place support blocks between the platformand base. Lower the platform onto the block.Crushing hazard. Keep away fromthe lowering platform.2 Remove the mounting fasteners from theplatform.3 Pull the platform away from the mast andremove it from the machine.Bodily injury hazard. Safety decalsare essential to safe machineoperation. Failure to replace allsafety and instructional decalscould result in death or seriousinjury. If a platform must bereplaced, be sure that allappropriate safety andinstructional decals are applied tothe new platform.How to Install a FiberglassPlatform1 Remove the aluminum platform. Refer toRepair Procedure, How to Remove anAluminum Platform.2 Support the platform with a lifting device, placethe platform against the mounting angles.3 Install the mounting fastener.Bodily injury hazard. Safety decalsare essential to safe machineoperation. Failure to replace allsafety and instructional decalscould result in death or seriousinjury. If a platform must bereplaced, be sure that allappropriate safety andinstructional decals are applied tothe new platform.
