September 2016 Service ManualChecklist A ProceduresPart No. 38139 AWP Super Series • IWP Super Series 45A-16 C hec k the Tire Pressur e- AWPS M odels with R ough T errai n Bas e OptionA-16Check the Tire Pressure - AWPSModels with Rough Terrain BaseOptionGenie specifications require that this procedure beperformed every 8 hours or daily, whichever comesfirst.It is essential to maintain proper pressure in allair-filled tires. Improperly inflated tires can affectmachine handling.1 Check each tire with an air pressure gauge.Add air as needed.Models before serial number 3899-11837.Tire pressure should be 30 psi / 2 bar in thefront and rear tires.Models after serial number 3899-11836.Tire pressure should be 50 psi / 3.4 bar in thefront and rear tires.A-17 C hec k the Air Supply Lubricator Oil Lev el- Air ModelsA-17Check the Air Supply LubricatorOil Level - Air ModelsGenie specifications require that this procedure beperformed every 8 hours or daily, whichever comesfirst.Maintaining the proper oil level in the lubricatorcanister is essential to safe operation and goodmachine performance. Failure to keep thelubricator canister at the proper oil level couldresult in unsafe operating conditions and maycause component damage.1 Be sure the platform is fully lowered.2 Inspect the lubricator canister for proper oillevel.Result: The oil level must be within ½ inch /12.7 mm from the top of the lubricator canister.3 To add oil, remove the oil lubricator canisterfrom the lubricator base and fill with oil. Installthe canister back onto the lubricator base.1 oil lubricator base2 oil lubricator canisterOil SpecificationOil Type 10W automotive engine oil
