9. Unload the tape cartridge by doing the following:a. At the left front of the drive, insert a 2.5-mm L-Hex wrench into the holemarked UNLOAD (1 in Figure 18).b. Turn the wrench in the direction marked on the drive (counterclockwise)until the tape ejects.10. Replace the cover of the drive (reverse the removal procedure).11. Replace the drive (refer to “Removing and Replacing the Drive” on page 27).Note: Service personnel should record on the service action report the errormessage that displayed on the LCD and the fact that the tape cartridge hadto be manually removed.Figure 18. Unloading the Tape Cartridge34 7208 Model 345 Service Guide
