IBM NetVista X40 User Manual
                                                                                                                                                            | |
Contents
|
v If the voltage supply range in your location is 90-137 V ac, set thevoltage-selection switch to 115 V.v If the voltage supply range in your location is 180-265 V ac, set voltageselection switch to 230 V.3. Turn on all devices connected to the computer.4. Press the power control button on your computer. For the location of the powercontrol button, see “Computer controls and indicators” on page 7.Attention: After you have turned on your computer for the first time, youmust complete the setup procedure before you turn off your computer;otherwise, unexpected results might occur.When you start your computer, you can select one of the following messages touse the configuration program or the recovery program. If you do not select thefollowing messages, your computer completes POST and the Windows desktopappears.v Press F1 for Configuration/SetupYou can use this program to configure serial- and parallel-connectorassignments, change the drive startup sequence, set the date and time, and setpasswords. See “Chapter 4. Configuring your computer” on page 27 for moreinformation about using the Configuration and Setup Utility.v To Start the Product Recovery Program, Press F11The Product Recovery Program is provided on your computer to assist you withsome recovery operations. This program enables you to recover Windows 2000,Windows NT, and other software programs. For more information aboutrecovering your preinstalled software, see “Recovering your operating systemand preinstalled software” on page 99.v << |
Related manuals for IBM IntelliStation E Pro 6836
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine