IBM xSeries 342 2RX Maintenance Manual

Contents

Error Code/Symptom FRU/Action166-198-000 System Management: Aborted(Unable to communicate with RemoteSupervisor Adapter. It may be busy. Runthe test again.) ( Communication with theRemote Supervisor Adapter has failed.)1. Rerun the Diagnostic Test2. Fix other error conditions and retry. These include other FailedSystem Management tests and items logged in the optional RemoteSupervisor Adapter’s System Error Log.3. Disconnect all server and option power cords from server, wait 30seconds, reconnect, and retry4. Remote Supervisor Adapter, if installed5. System Board166-201-001 System Management: Failed(I2C Bus Error(s))(ISMP indicates I2C errors on bus 0.Potential FRUs: Memory DIMMs, systemboard.)1. If installed, reseat I2C cable between Remote Supervisor Adapter(in PCI slot 1/J44) and planar (J45)2. Reseat Memory DIMMs3. Memory DIMMs4. System board166-201-002 System Management: Failed(I2C Bus Error(s))(ISMP indicates I2C errors on bus 2.Potential FRUs: LED front panel, systemboard.)1. Reseat I2C cable between operator information panel and planar(J39)2. Operator information panel3. System board166-201-003 System Management: Failed(I2C Bus Error(s))(ISMP indicates I2C error on bus 3.Potential FRUs: power backplane,systemboard.)1. Reseat cables between Power Backplane and planar2. Power Backplane3. System board166-201-004 System Management: Failed(I2C Bus Error(s))(ISMP indicates I2C error on bus 4.Potential FRUs: DASD backplane, systemboard.)1. If installed, reseat I2C cable between Yugo DASD backlpane andDASD I2C on planar (j(02. System board166-201-005 System Management: Failed(I2C Bus Error(s))(ISMP indicates I2C errors on bus 0, 1, or 5.Potential FRUs: Memory DIMMs, CPUs,system board.)1. Reseat Memory DIMMs2. Reseat processors3. Memory DIMMs4. Processors5. System board166-260-000 System Management: Failed (Unable to restart Remote SupervisorAdapter.) Restart Remote SupervisorAdapter Error. After restarting, RemoteSupervisor Adapter communication waslost. Unplug and cold boot to reset RemoteSupervisor Adapter.)1. Disconnect all server and option power cords fron server, wait 30seconds , reconnect, and retry.2. Reseat Remote Supervisor Adapter (in PCI slots 1/J44).3. Remote Supervisor Adapter166-342-000 System Management: Failed(Remote Supervisor Adapter BIST indicatefailed tests.)1. Ensure the latest firmware levels for Remote Supervisor Adapterand BIOS.2. Disconnect all server and option power cords from server, wait 30seconds, reconnect, and retry3. Remote Supervisor AdapterSymptom-to-FRU index 87