AFL2-12A-D525 Series Panel PCPage 154C.4.4 ManualTo restore the last system backup, please follow the steps below.Step 10: Type <4> and press <Enter> in the main menu.Step 11: The Symantec Ghost window appears. Use the Ghost program to backup orrecover the system manually.Figure C-33: Symantec Ghost WindowStep 12: When backup or recovery is completed, press any key to reboot the system.Step0:C.5 Other InformationC.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A ControllerWhen the system uses AHCI mode or some specific SATA controllers such as ALi M5283or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one keyrecovery. Please follow the steps below to install the SATA RAID/AHCI driver.Step 1: Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk intoa USB floppy disk drive. The SATA RAID/AHCI driver must be especiallydesigned for the on-board SATA controller.
