AFL2-12A-D525 Series Panel PCPage 65Figureٛ 5-2: Internal Cover Retention ScrewsStep 2: Lift the aluminum cover off the AFL2-12A-D525. Step 0:5.5 Replacing Components5.5.1 Memory Module ReplacementThe flat bezel panel PC is preinstalled with a 1.0 GB DDR3 memory module. If thememory module fails, follow the instructions below to replace the memory module.Step 1: Follow all anti-static procedures. See Section 5.2.Step 2: Turn off the power. See Section 5.3.Step 3: Remove the back cover. See Section 5.4.1 above.Step 4: Remove the internal aluminum back cover. See Section 5.4.2 above.Step 5: Locate the DDR3 SO-DIMM on the motherboard.Step 6: Remove the DDR3 memory module by pulling both the spring retainer clipsoutward from the socket.Step 7: Grasp the DDR3 memory module by the edges and carefully pull it out of thesocket.