AFL2-12A-D525 Series Panel PCPage 474.6 AT/ATX Mode SelectionAT and ATX power modes can both be used on the AFL2-12A-D525. The selection ismade through an AT/ATX switch located on the I/O panel (Figure 4-9). To select AT modeor ATX mode, follow the steps below.Step 1: Locate the AT/ATX switch on the I/O panel (Figure 4-9).Figure 4-9: AT/ATX Switch LocationStep 2: Adjust the AT/ATX switch. Step 0:4.6.1 AT Power ModeWith the AT mode selected, the power is controlled by a central power unit rather than apower switch. The AFL2-12A-D525 panel PC turns on automatically when the power isconnected. The AT mode benefits a production line to control multiple panel PCs from acentral management center and other applications including: ATM Self-service kiosk Plant environment monitoring system Factory automation platform Manufacturing shop flow4.6.2 ATX Power ModeWith the ATX mode selected, the AFL2-12A-D525 panel PC goes in a standby modewhen it is turned off. The panel PC can be easily turned on via network or a power switchin standby mode. Remote power control is perfect for advertising applications since thebroadcasting time for each panel PC can be set individually and controlled remotely. Otherpossible application includes Security surveillance
