AFL2-12A-D525 Series Panel PCPage 726.1 IntroductionA licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setupprogram allows users to modify the basic system configuration. This chapter describeshow to access the BIOS setup program and the configuration options that may bechanged.6.1.1 Starting SetupThe UEFI BIOS is activated when the computer is turned on. The setup program can beactivated in one of two ways.1. Press the F2 key as soon as the system is turned on or2. Press the F2 key when the “Press F2 to enter SETUP” messageappears on the screen. 0.If the message disappears before the F2 key is pressed, restart the computer and tryagain.6.1.2 Using SetupUse the arrow keys to highlight items, press ENTER to select, use the PageUp andPageDown keys to change entries, press F1 for help and press ESC to quit. Navigationkeys are shown in the following table.Key FunctionUp arrow Move to the item aboveDown arrow Move to the item belowLeft arrow Move to the item on the left hand sideRight arrow Move to the item on the right hand side+ Increase the numeric value or make changes- Decrease the numeric value or make changesPage Up key Move to the next pagePage Dn key Move to the previous page