AFL2-12A-D525 Series Panel PCPage 50Step 6: Insert the four monitor mounting screws provided in the wall mount kit into thefour screw holes on the real panel of the flat bezel panel PC and tighten until thescrew shank is secured against the rear panel (Figure 4-11).WARNING:Please use the M4 screws provided in the wall mount kit for the rear panel.If the screw is missing, the thread depth of the replacement screw shouldbe not more than 4 mm.Step 7: Align the mounting screws on the monitor rear panel with the mounting holes onthe bracket.Step 8: Carefully insert the screws through the holes and gently pull the monitordownwards until the monitor rests securely in the slotted holes (Figure 4-11).Ensure that all four of the mounting screws fit snuggly into their respectiveslotted holes.NOTE:In the diagram below the bracket is already installed on the wall.
