AFL2-12A-D525 Series Panel PCPage 796.3.3 IDE ConfigurationUse the IDE Configuration menu (BIOS Menu 5) to change and/or set the configurationof the SATA devices installed in the system.Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.AdvancedPATA Master Not PresentPATA Slave Not PresentSATA Port0 KINGSTON SS100 (16.0GSATA Port1 Not PresentSATA Port2 Not PresentSATA Port3 Not PresentATA/IDE Configuration [Enhanced]Configure SATA as [IDE]Select ATA/IDEConfiguration---------------------: Select Screen : Select ItemEnter Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save & ExitESC: ExitVersion 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.BIOS Menu 5: IDE Configuration ATA/IDE Configuration [Enhanced]Use the ATA/IDE Configuration option to configure the SATA controller. Disabled Disables the on-board SATA controller. Compatible D EFAULT Configures the on-board SATA controller to be incompatible mode. In this mode, a SATA channel willreplace one of the IDE channels. This mode supportsup to 6 storage devices. Enhanced Configures the on-board SATA controller to be inEnhanced mode. In this mode, IDE channels and SATAchannels are separated. Configure SATA as [IDE]Use the SATA Mode option to configure SATA devices as normal IDE devices.
