AFL2-12A-D525 Series Panel PCPage 494.9.1 Wall MountingTo mount the flat bezel panel PC onto the wall, please follow the steps below.Step 1: Select the location on the wall for the wall-mounting bracket.Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retentionscrews.Step 4: Align the wall-mounting bracket screw holes with the pilot holes.Step 5: Secure the mounting-bracket to the wall by inserting the retention screws intothe four pilot holes and tightening them (Figure 4-10).Figure 4-10: Wall-mounting Bracket
