AFL2-12A-D525 Series Panel PCPage 56Step 4: Slide the flat bezel panel PC with the attached rack/cabinet bracket into a rack orcabinet (Figure 4-17).Figure 4-17: Install into a Rack/CabinetStep 5: Once the flat bezel panel PC with the attached rack/cabinet bracket has beenproperly inserted into the rack or cabinet, secure the front of the rack/cabinetbracket to the front of the rack or cabinet (Figure 4-17).Step 0:4.10 Bottom Panel Connectors4.10.1 LAN ConnectionThere are two external RJ-45 LAN connectors. The RJ-45 connector enables connectionto an external network. To connect a LAN cable with an RJ-45 connector, please followthe instructions below.Step 1: Locate the RJ-45 connectors on the bottom panel of the AFL2-12A-D525.Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one ofthe RJ-45 connectors on the bottom panel of the AFL2-12A-D525. See Figure4-18.
