265MEMORY OPERATION5 Programming a memory channelVFO settings, including the set mode contents such as sub-audible tone frequency or offset, can be programmed into amemory channel.qSet the desired frequency.➥ Push [V/MHz•SCAN] to select VFO mode.➥ Set the frequency using [DIAL].➥ Set other data (e.g. tone frequency, duplex information,etc.) if required.w Push [S.MW•MW].• “!” indicator and the memory channel number blink.eRotate [DIAL] to select the memory channel to be pro-grammed.• Memory channels not yet programmed are blank.r Push [S.MW•MW] for 1 sec. to program.• 3 beeps sound• Memory channel number automatically increases when contin-uing to push [M/CALL•MW] after programming.✔CONVENIENTMemory programming can be performed in versatile wayse.g. memory channel to the same (or different) memory chan-nel, memory channel to the call channel, etc.[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the controller.Push Rotate for setting frequency, etc. Push .Rotate Push for 1 sec. and continue to push ➠Beep“BeepBeepBeep“““““Beep“
