Icom IC-E208 Instruction Manual

Also see for IC-E208: Service manual

Contents

295 MEMORY OPERATIOND Memory/call➪memory/callq Select the memory/call channel to be transferred.➥ Push [M/CALL•PRIO] several times to select memorymode or call channel, then rotate [DIAL] or push [BAND]to select the desired memory or call channel respec-tively.w Push [S.MW•MW] momentarily.• “!” indicator and “-- -- --” indication blink, and shows VFO con-ditions.e Rotate [DIAL] to select the target memory channel.• “C1” or “C2” blinks when the call channel is selected.• Scan edge channels, 1A/1B, 2A/2B, 3A/3B, 4A/4B, 5A/5B canalso be selected.r Push [S.MW•MW] for 1 sec. to transfer the selected mem-ory/call channel contents to the target memory.• The targeted memory and transferred contents are indicated.z Select the memory/call channel to be trans-ferred.➥ Push [MR/CALL] to select memory mode,then select the desired memory channelvia [Y]/[Z] or keypad.➥ Push [MR/CALL] for 1 sec. then push[BAND] to select the desired call channel.x Push [FUNC], then [CLR A(MW)] momentarily.• “!” indicator and “-- -- --” indication blink, andshows VFO conditions.c Push [Y]/[Z] to select the target memorychannel.• “C1” or “C2” blinks when the call channel is selected.• Scan edge channels can also be selected.• The keypad cannot be used for the selection.v Push [FUNC] then push [ CLR A(MW)] for1 sec. to transfer the selected memory/callchannel contents to the target channel.• The targeted channel and transferred contentsare indicated.MR/CALLMWBAND[Y]/[Z][EXAMPLE]: Transferring memory channel 30 contents to channel 31.Select the target channel. Push for 1 sec.Push then push for 1 sec.Select the memory channel, then push .Select the memory channel, push then push .Front panel operation:HM-133 operation: