427SCAN OPERATION7D Programming scan edges via microphonez Set the desired frequency in VFO mode.➥ Push [VFO/LOCK] to select VFO mode.➥ Set the frequency via the keypad or [Y]/[Z].x Push [FUNC] then [CLR A(MW)] momentarily.c Push [Y] or [Z] to select scan edge channels,1A, 2A, 3A, 4A or 5A.v Push [FUNC], then push [CLR A(MW)] for 1 sec.to program.• 3 beeps sound and VFO is automatically selected.• Memory channel number advances to the next scanedge channel, 1B, 2B, 3B, 4B or 5B when continuingto push [CLR A(MW)] after programming.b To program a frequency for the other scan edge channels,repeat steps z to v.MW[EXAMPLE]: Programming 145.800 MHz into scan edge 1B.Push Push Push then momentarilyPush Push then for 1 sec. and continue to push ➠Beep“BeepBeepBeep“““““
