285MEMORY OPERATION5 Copying memory contentsThis function copies a memory channel’s contents to VFO (oranother memory/call channel). This is useful when searchingfor signals around a memory channel frequency and for re-calling the offset frequency, subaudible tone frequency etc.D Memory/call➪VFOq Select the desired memory or call channel.➥ Push [M/CALL•PRIO] several times to select memorymode or call channel, then rotate [DIAL] or push [BAND]to select the desired memory or call channel respec-tively.w Push [S.MW•MW] for 1 sec. to transfer the selected mem-ory/call channel contents to the VFO.• VFO mode is selected automatically.z Select the memory/call channel to betransferred.➥ Push [MR/CALL] to select memory mode,then select the desired memory channelvia [Y]/[Z] or keypad.➥ Push [MR/CALL] for 1 sec. then push[BAND] to select the call channel.x Push [FUNC], then [CLR A(MW)] for 1 sec. totransfer the selected memory/call channelcontents to the VFO.• VFO mode is selected automatically.MR/CALLMWBAND[Y]/[Z][EXAMPLE]: Transferring memory channel 30 contents to VFO.Push to select memory mode.Front panel operation:HM-133 operation:Push to select memory mode.Rotate for selecting memory channel.Push [Y]/[Z] to select memory channel.Push for 1 sec.Push then push for 1 sec.

explicit definitions

quick reference guide

using the mounting bracket

microphone connection

battery connection

antenna installation

i repeater operation

i programming memory channels

PANEL DESCRIPTION

I Function display

I Rear panel

I Microphone (HM-133)

I Microphone keypad

I Optional microphones (HM-118N/TN)

SETTING A FREQUENCY

I Using the tuning dial

I Tuning step selection

I Lock functions

BASIC OPERATION

I Squelch attenuator

I Transmitting

I One-touch PTT function

REPEATER OPERATION

I Accessing a repeater

I Subaudible tones

I Offset frequency

MEMORY OPERATION

I Programming a memory channel

I Copying memory contents

I Memory clearing

I Programming channel names

I Memory bank selection

I Memory bank setting

I Transferring bank contents

CALL CHANNEL OPERATION

I Programming a call channel

SCAN OPERATION

I Scan start/stop

I Scan edges programming

I Skip channel setting

I Scan resume condition

PRIORITY WATCH

I Priority watch operation

I Programming a DTMF code

dtmf memory encoder

I Transmitting a DTMF code

I Pocket beep operation

pocket beep and tone squelch

tone scan

other functions

I Initial set mode

I AM/FM narrow mode

i microphone keys

I Partial reset

I Data cloning

i packet operation

I Troubleshooting

i fuse replacement

I Speciﬁcations

I Options

mode arrangement

Icom IC-E208 Instruction Manual

IC-E208