37CALL CHANNEL OPERATION6 Call channel selectionCall channel is pre-programmed memory channel that can beaccessed by simply pushing call channel button.➥ Push [M/CALL•PRIO] several times to select the call chan-nel mode then push [BAND] to select the desired callchannel.• “C1” or “C2” appears instead of memory channel number indi-cation.• Push [M/CALL•PRIO] several times to select memory mode, orpush [V/MHz•SCAN] to select VFO mode.➥ Push [MR/CALL] for 1 sec. to select the callchannel mode then push [Y]/[Z] to select thedesired call channel in the main band.• Push [MR/CALL ] to select memory mode, or push[VFO/LOCK] to select VFO mode. Call channel transferringq Push [M/CALL•PRIO] several times then push [BAND] toselect the desired call channel.• “C1” or “C2” appears.w Push [S.MW•MW] then rotate [DIAL] to select the memorychannel to transfer the contents.• “!” indicator and memory channel number blink.• To transfer to the VFO, select “-- -- --” with [DIAL] then push.e Push [M/CALL•MW] for 1 sec. to transfer the contents.z Push [MR/CALL] for 1 sec. then push [BAND]to select the desired call channel.x Push [FUNC], [CLR A(MW)] momentarily, thenpush [Y]/[Z] to select the memory channel totransfer the contents.• To transfer to the VFO, push [Y]/[Z] to select“-- -- --”.c Push [FUNC], then [CLR A(MW)] for 1 sec. totransfer the contents.MR/CALLMWBAND[Y]/[Z]MR/CALL[M/CALL•PRIO] “C1” or “C2” appears✔INFORMATIONWhen the VFO mode isselected from the call channel,a small “c” appears instead ofmemory channel number.

explicit definitions

quick reference guide

using the mounting bracket

microphone connection

battery connection

antenna installation

i repeater operation

i programming memory channels

PANEL DESCRIPTION

I Function display

I Rear panel

I Microphone (HM-133)

I Microphone keypad

I Optional microphones (HM-118N/TN)

SETTING A FREQUENCY

I Using the tuning dial

I Tuning step selection

I Lock functions

BASIC OPERATION

I Squelch attenuator

I Transmitting

I One-touch PTT function

REPEATER OPERATION

I Accessing a repeater

I Subaudible tones

I Offset frequency

MEMORY OPERATION

I Programming a memory channel

I Copying memory contents

I Memory clearing

I Programming channel names

I Memory bank selection

I Memory bank setting

I Transferring bank contents

CALL CHANNEL OPERATION

I Programming a call channel

SCAN OPERATION

I Scan start/stop

I Scan edges programming

I Skip channel setting

I Scan resume condition

PRIORITY WATCH

I Priority watch operation

I Programming a DTMF code

dtmf memory encoder

I Transmitting a DTMF code

I Pocket beep operation

pocket beep and tone squelch

tone scan

other functions

I Initial set mode

I AM/FM narrow mode

i microphone keys

I Partial reset

I Data cloning

i packet operation

I Troubleshooting

i fuse replacement

I Speciﬁcations

I Options

mode arrangement

Icom IC-E208 Instruction Manual

IC-E208