47DTMF MEMORY ENCODER9 Programming a DTMF codeDTMF tones are used for autopatching, controlling otherequipment, etc. The transceiver has 16 DTMF memory chan-nels (D0–DF) for storage of often-used DTMF codes of up to24 digits.q Push [MONI•DTMF] for 1 sec. to turn the DTMF encoderON.• “d” appears in place of 100 MHz digit.w Push [SET•LOCK] to enter the DTMF memory program-ming condition.• The DTMF memory channel indication blinks.e Rotate [DIAL] to select the desired DTMF memory chan-nel.r Push [SET•LOCK].• The first digit blinks.t Rotate [DIAL] to select the desired code.y Push [SET•LOCK] to select the next digit.• Pushing [S.MW•MW] moves the cursor backward.u Repeat the steps t and y to set the desired DTMF tonesequence.• The S/RF indicator shows the digit group. The indication in-creases every 6 digits.i Push [MONI•DTMF] to exit DTMF memory programmingcondition.• Return to the previous indication as in step q.[EXAMPLE]: Programming “5428AB453” into DTMF memory channel “D4.”PushPush then rotate Repeat the previous step untilthe desired code is entered. PushRotatePush for 1 sec.
