355 MEMORY OPERATION Memory bank setting[q Push [M/CALL•PRIO] several times to select memorymode, then select the desired memory channel via [DIAL].w Push [SET•LOCK] to enter set mode.e Push [SET•LOCK] or [S.MW•MW] several times until“BAK” appears.r Rotate [DIAL] to select the desired bank to be set.t Push [V/MHz•SCAN] to exit set mode.z Push [MR/CALL] then select the desired mem-ory channel via [Y]/[Z] or keypad.x Push [SET B(D-OFF)] to enter set mode.c Push [SET B(D-OFF)] or [ENT C(T-OFF)] severaltimes until “BAK” appears.v Push [Y]/[Z] to select the desired bank to beset.b Push [ CLR A(MW)] to set the channel into thebank and exit set mode.SETB[SET•LOCK] Bank’s initial blinks
