IVQUICK REFERENCE GUIDED Optional MB-58 installationThe optional MB-58 REMOTE CONTROLLER BRACKET is avail-able for separate installation.q Drill 2 or 4 holes where the bracket is to be installed.• Approx. 4 mm when using nuts; approx. 1–2 mm when usingself-tapping screws.wInsert the supplied screws, bolts and washers through themounting base and tighten.eAdjust the angle for the clearest view of the function dis-play and tighten 2 screws when the mounting base is used.rAttach the supplied Velcro pads (large) to the remote con-troller and bracket.tAttach the supplied Velcro pads (small) or rubber pad tothe bracket as shown below; then attach the remote con-troller.• When using the optional MB-65MB-58MB-65Adjust the viewingangle for maximumvisibility of thefunction display.MB-58 IC-E208 remote controllerBracketWhen using self-tapping screws.MountingbaseMountingboltQuick reference guide
